#031

M1S

Two low-power relays (configuration 1)

Two mechanical low-power relays with independent normally opened terminals.

Form: M1S
Power:
  • 5V - Consumes 60mA
Mates with: #19, #20, #21

Details

These relays are rated for 1A/30V.

To activate a relay, set the corresponding control line LOW. When left unconnected, control lines default to HIGH (and, hence, relays are off).

Combine this Tibbit with terminal block devices — #20 (nine terminal blocks) or #21 (four terminal blocks).

LEDs

There are two red LEDs which are connected to two relay control lines. LEDs light up for the LOW state of control lines (i.e. when relays are activated).